Hangzhou Winteam Scientific Instruments Co., Ltd.
THE MISSION OF WINTEAM IS PROVIDE BETTER STERILITY TEST PRODUCTION
|Place of Origin:||CHINA|
|Minimum Order Quantity:||ONE BOX|
|Packaging Details:||72sets/box,18sets/box, 48sets/box,12 sets/box|
|Supply Ability:||10000sets per day|
|Name:||Sterility Test Canister||Membrane Material:||MCE NYLON PP|
|Pakcing:||400pc||Needle:||304 Stainless Steel|
sterility test kit canister,
sterility testing pump
Reliable closed sterile canister ISO9001 AS base for Pharmaceutical factory
How much material do I need for testing?
The amount of material and the minimum number of samples to test depends on the number and size of vials produced per production lot. The IHC describes the minimum number of test items to check the sterility of the entire batch. WINTEAM can advise on the number of samples required for batch release.
The need for sterility between biopharmaceuticals varies. Certain products, such as those intended for intravenous injection, must be proven as sterile, but other products may require microbiological restrictions. This is a limit to the microorganisms that can be contained in the final product, so the risk to the consumer is very low, but reasonable for manufacturing. In these cases, bioburden testing should be used instead of infertility testing. The bioburden test assesses the microbial content of a product. In this test, samples were used to inoculate agar plates. Incubate the plate and count the number of microbial colonies. This can be used to determine the total number of microorganisms present in the product and can be compared to the tolerance limits specified in regulatory guidelines.
Characteristics of Sterility Test Canister
Sterility testing is an extremely important step in the release of sterile products. False positives, false negative test results, and laboratory equipment failures and human error will bring a lot of time and money to the customer and directly affect the final release of the product. The collection of YT series of bacterial collection equipment and sterile culture equipment provides the perfect solution. The test sample pump in different packaging forms is safely and evenly transferred to the collection incubator by the peristaltic collection instrument pump, so that the sterility test result is more consistent and reliable.
|Schematic Diagram||Model||Inspection Style||Packing Spe.|
|Py220C||Glass Bottle Large Volume Injection||
|Ksf220C||Glass Bottle Large-Capacity Antibiotic Injection|
|Kapy220C||Ampoule Antibiotic Injection|
|Dgb220C||Vial Bottle Soluble Powder|
Vial Bottle Soluble Antibiotic Powder
|Sdy220C||Soft Bag Large Volume Injection|
|Nkf220C||Powder That Needs To Be Dissolved And Diluted|
Sterility examination should be carried out under aseptic conditions. The test environment must meet the requirements of sterility inspection. The whole process should be strictly followed by aseptic operation to prevent microbial contamination. Measures to prevent contamination should not affect the detection of microorganisms in the test sample. The unidirectional flow air zone, work surface and environment shall be regularly checked for cleanliness according to the current national standards for test methods for suspended particles, planktonic bacteria and settled bacteria in the clean room (district) of the pharmaceutical industry. The isolation system shall be verified periodically according to the relevant requirements, and the cleanliness of its internal environment shall comply with the requirements of sterility inspection. Daily testing also requires monitoring of the test environment.
USP describes three general methods for sterility testing: 1) membrane filtration, 2) direct transfer (product immersion) and 3) product rinsing.
Membrane filtration sterility test
Membrane filtration sterility testing is the method of choice for drugs, not the choice of medical devices; FDA may question the principle of using membrane filtration testing rather than direct device transfer testing. The test is for instruments containing preservatives and having bacteriostatic and/or fungal static effects under direct transfer methods. The concept of membrane filtration is that the microorganisms will accumulate on the surface of a filter having a pore size of 0.45 microns. The test medium was liquid thioglycolic acid medium (FTM) and soy casein digestion medium (SCDM), which was selected according to its ability to support anaerobic and aerobic microbial growth. The incubation time is 14 days, because a lot of operations are required, so a large number of aerobic bacteria and fungi (ie yeast and mold) are required. For sterility testing of membrane-filtered medical devices, the possibility of laboratory contamination is high, so in open systems, sterility may be higher when using this method; for drugs and small devices or combination products, A closed system is recommended. Closed using a closed system. In closed systems, the incidence of external contamination is low.
Contact Person: wong
One - Off Sterility Test Canister Unit Pharmaceutical Factory Use Silicon Rubber Cap
Single Use Sterility Peristaltic Test Device Pump , Sterility Test Device 48 Sets / Box
Millipore Level Sterility Test Device , Lab Steritest System PVC Tube
304 SS Automatic Sterility Test Pump Low Noisy 17kg Pump Speed 15-240rpm
Safety Sterility Testing Hardware , Sterility Test Device With Printer Test Pump
Customized Type Sterility Testing Accessories , Sterility Test Kit Electronic Power
Transfer Dispensing Isolator , 220v 50hz Cleanroom Containment Isolator
A Air Classification Sterilization System , 304 SS Cleanroom Isolator
Positive Pressure Isolator , Commercial Sterility Test Soft PVC Chamber