Hangzhou Winteam Scientific Instruments Co., Ltd.
THE MISSION OF WINTEAM IS PROVIDE BETTER STERILITY TEST PRODUCTION
|Place of Origin:||CHINA|
|Minimum Order Quantity:||one set|
|Packaging Details:||wooden case|
|Name:||License Plate Stamping Machine||Glue Time:||2000h|
vehicle number plate punching machine,
hydraulic embossing press machine
license plate stamping machine with conveyor simens PLC control
|Dimensions (including inlet and outlet)||1565*627*1540mm(L×W×H)|
|Dimensions (excluding the inlet and outlet)||900*627*1540mm(L×W×H)|
|Working power supply||AC220±22V 50HZ±1HZ|
|Rubber roller motor power||90W|
|Roller motor power||25W|
|Film motor power||40W|
|Maximum hot stamping width||240mm|
|Preheat time||15 min|
|License plate printing speed||0～3m/min|
|Roller height accuracy||0.01mm|
|Hot stamping temperature||0℃～280℃|
|Hot stamping temperature accuracy||1℃|
The license plate stamping process needs to meet the following basic conditions:
1. The bottom of the license plate is reflective and the words are not reflective.
2. The license plate font and border color are the same.
3. The reflective film and the hot stamping film need to be matched.
License plate hot stamping process:
Leveling - film - punching - endorsement - pressing word - hot stamping
License plate hot stamping principle:
The essence of hot stamping is transfer, which is the process of transferring the ink on the hot stamping film to the license plate by the action of heat and pressure. When hot stamping, the hot melt adhesive layer of the hot stamping film is melted and adhered to the surface of the license plate, and the melt flow of the release agent layer of the hot stamping film is separated from the carrier film substrate, and the ink on the carrier film is transferred to the license plate. The reason why the transfer can be caused is that the hot melt adhesive is heated to generate a bonding force and the release agent is heated and the adhesive force is lost.
Hot stamping machine structure:
The license plate hot stamping machine is mainly composed of a film releasing device, a film collecting device, a heater, a rubber roller, a driven wheel, a brush plate, a frame, a control system and the like.
Contact Person: wong