Hangzhou Winteam Scientific Instruments Co., Ltd.
THE MISSION OF WINTEAM IS PROVIDE BETTER STERILITY TEST PRODUCTION
|Place of Origin:||CHINA|
|Minimum Order Quantity:||one set|
|Packaging Details:||wooden case|
|Name:||Sterility Test Pump||Cerfitication:||ISO|
|Port:||Shanghai Or Ningbo||Usage:||Auto Testing Machine,fluid|
sterility testing hardware,
biological products test pump
YT-603 Customized Type LCD Display Speed Adjustment Stainless Steel Body Sterility
Secondary features of the intelligent blockade collection instrument:
1. New pump head: fair tensioning method, easy and fast to operate.
2. The transmission system is driven by a low-speed motor, which is indirectly driven, thereby reducing the output power and the temperature of the body appearance. The tone is below 50db.
3. The peristaltic pump has a safe maintenance installation, which automatically stops the operation when it is turned on and off to prevent damage to the person due to operational errors.
4. The parts adopt L304 stainless steel integrated ultra-small design to increase the occupied space of the console.
5. The speed control is controlled by the stepless rotary speed control method, the operation is complicated and indirect, and the memory function is suspended.
A one-time use of a fully enclosed collection culture incubator. sterility test pump Integral stainless steel casing design: All use L304 sanitary grade stainless steel to solve the requirements of the clean room. Microbial chamber high clean instrument. Improve the service life of the instrument and reduce the cost of repair, replacement, etc. caused by rust on the surface of the traditional collection instrument. It avoids the corrosion of the surface of the chemical, and the design of the surface of the casing does not leave any dead angle. Through the principle of directional peristaltic pressure of the collecting instrument, the microorganisms in the test sample are trapped in the microporous membrane of the filter at 0.22μm*47mm or 0.45μm*47mm, and the bacteriostatic components are removed by rinsing the filter, and then the desired The culture medium is directly introduced into the fully enclosed filter collection incubator through the injection pipeline, and placed in an incubator for aseptic culture.
|Name||sterility test pump|
|Working power supply:||AC220V/50Hz|
|Peristaltic pump speed:||15 ~ 240rpm|
|Height (with bottle holder):||39cm|
4, sterility test pump control instructions
4.1 Overview of the sterility test pump
Promise split-type digital governor, perpetual calendar clock, speed/clock LCD with backlight and wide vision.
4.2 fsterility test pump display and operation
(1) After turning on the power, press the gear speed control selection button to enter the interface, the device starts running and displays the current speed.
(2) When the equipment is running, press ▲ or fine-tune the speed to adjust to the required speed.
(3) When the test article is finished filtering or needs to stop midway, press stop or the foot pedal switch.
4.3 sterility test pump working environment
(1) Environmental requirements: in a clean laboratory or in a clean bench.
(2) Ambient temperature: 4 ° C ~ 25 ° C
(3) Relative humidity: ≤90% RH or less (anhydrous beads condensation phenomenon)
(4) Working power supply: 220V/50HZ
(5) Electrical safety: The instrument requires grounding and reliable grounding. The grounding impedance is ≤ 4n, and the wire diameter of the grounding wire is 1.6mm or more.
Contact Person: wong